RSS-export van de vacatures - Alleen actuele vacatures : Nee / Geografisch gebied : Afrique / Land : Europe-->Luxembourg, Afrique-->Nigéria, Asie-->Indonésie

2026-43268 - PSV Senior Technician M/F

Fri, 08 May 2026 22:29:57 Z

Overeenkomst : Bepaalde duur
Functiebeschrijving :
SPIE Services Nigeria Limited is currently looking for a PSV Senior Technician to join its work force in Nigeria. He/She shall be responsible for the safe inspection, testing, maintenance, and certification of all Pressure Safety Valves across upstream, midstream, and downstream facilities in compliance with DPR/NUPRC regulations, API standards, and company HSE policies. You protect lives, assets, and production continuity in a high-risk environment. Key Responsibilities Maintenance & Repair Strip down, clean, lap seats, replace springs, bellows, and O-rings on valves from brands like Crosby, Anderson Greenwood, Leser, and Farris Execute emergency repairs during unplanned shutdowns to avoid flaring penalties Testing & Certification Perform statutory PSV testing and recertification intervals as mandated by NUPRC Guidelines and API 576 - typically every 12-36 months depending on service Conduct bench testing and in-situ testing using deadweight testers and portable pop testers on FPSOs, flow stations, refineries, and gas plants Stamp and issue PSV certification tags acceptable to NUPRC and third-party inspectors HSE & Regulatory Compliance Ensure 100% compliance with DPR Safety Regulations 1997 and NMDPRA requirements Complete Permit to Work (PTW), JSA, and Toolbox Talk documentation before any job

Minimum ND/HND Mechanical Engineering from NBTE-accredited polytechnic. B.Eng preferred for IOC roles API 510 or API 570. BOSIET + HUET for offshore roles. COREN registration is an advantage 8-10 years in oil & gas, with 6 years minimum on PSV maintenance. FPSO/LNG experience is a plus
Plaats van tewerkstelling : Offshore - Lagos
Taal / Niveau :
Engels : C - Vloeiend

2026-43266 - Senior CBM Technician M/F

Fri, 08 May 2026 22:29:55 Z

Overeenkomst : Onbepaalde duur
Functiebeschrijving :
SPIE Services Nigeria Limited is currently looking for Senior CBM Technician to join its work force in Nigeria. KEY RESPONSIBILITY: Rotating Equipment ExpertisePumps, compressors, motors, turbines Bearing and seal maintenance Alignment and balancing techniques Vibration AnalysisData collection and interpretation Use of vibration monitoring tools (e.g., CSI, SKF, Bently Nevada) First-level diagnostics and reporting Infrared ThermographyThermal imaging for electrical and mechanical systems Identifying hotspots, insulation issues, and sand levels in vessels Lubrication & Oil AnalysisOil sampling procedures Understanding of oil properties and contamination indicators Familiarity with oil analysis software and databases Condition Monitoring SystemsPI System (OSIsoft) or similar platforms Real-time data interpretation (temperature, pressure, vibration) Mechanical Maintenance & TroubleshootingHands-on repair and refurbishment (e.g., bearing/motor replacement) Use of hand and power tools Reading mechanical drawings and P&IDs

Minimum of 5 years' experience in the maintenance field on offshore oil and gas installations. Higher National Diploma or Higher qualification in Mechanical/Production Engineering Ability to perform detailed vibration collection and analysis, download the data into the vibration database, realize first level of analysis of results, send a monthly backup to onshore for detailed analysis and follow achievement of Company's approved vibration corrective actions Ability to carry-out and interpret thermography survey, perform daily monitoring of Pump & Turbines condition (temperature, performance, vibration etc.) with the online process data (Pl) and suggest corrective actions to avoid failures Knowledge of Spectrographic (oil analysis).
Plaats van tewerkstelling : Offshore
Taal / Niveau :
Engels : E - Moedertaal

2026-43265 - HVAC Senior Technician M/F

Fri, 08 May 2026 22:29:53 Z

Overeenkomst : Bepaalde duur
Functiebeschrijving :
SPIE Global Services Energy is looking to strengthen its workforce in Nigeria by recruiting experienced HVAC Senior Technician to join our offshore operations team. Key Responsibility: Maintenance & Repair Service and repair HVAC for control rooms, switchgear rooms etc. Maintain positive pressure systems in control rooms to prevent hydrocarbon gas ingress per IECEx/ATEX standards Overhaul chillers, packaged units, AHUs, and VRF systems in corrosive saltwater environment Standby during drilling and production operations. Installation & Commissioning Install new HVAC systems and oversee piping, ductwork, and electrical connections Commission systems and conduct performance testing before handover to operations Read and interpret mechanical and electrical drawings, P&IDs, and HVAC schematics HSE & Compliance Ensure compliance with NUPRC safety standards, ASHRAE guidelines, and company HSE policies Complete PTW, JSA, and LOTO before working on energized equipment

Experience on offshore oil and gas producing facility, preferable FPSO. Minimum of 8 years' experience in the field of repair of HVAC & Refrigeration systems. Must hold recognized OND or equivalents or have completed a recognized trade apprenticeship or verified technician training scheme with a minimum of working experience. Must be able to work effectively as part of a team.
Plaats van tewerkstelling : Lagos - offshore
Taal / Niveau :
Engels : C - Vloeiend

2026-43264 - Valve Senior Technician M/F

Fri, 08 May 2026 22:29:51 Z

Overeenkomst : Bepaalde duur
Functiebeschrijving :
We are seeking an experienced Valve Technician to join our team for a comprehensive valve greasing campaign during the Shutdown. Key Responsibilities: Valve Maintenance and Greasing Perform routine and preventive maintenance, including greasing, on a wide range of valves such as ball, gate, globe, butterfly, and check valves. Tool and Equipment Management Properly handle and maintain tools and equipment used in valve maintenance.

High school diploma or equivalent. Technical certification in mechanical or industrial maintenance is preferred. Minimum of 6years of experience as a valve technician, preferably in an offshore environment. Proficiency in valve maintenance, repair, and greasing. Familiarity with various valve types and their operating principles. Valid offshore safety and survival certificates (e.g., BOSIET, HUET). Trade certifications related to valve Ability to work in offshore conditions, including climbing, lifting, and working in confined spaces.
Plaats van tewerkstelling : Offshore - Lagos
Taal / Niveau :
Engels : C - Vloeiend

2026-42712 - HEAD OF MECHANICAL MAINTENANCE PREPARATOR - ONSHORE M/F

Thu, 07 May 2026 22:29:44 Z

Overeenkomst : Onbepaalde duur
Functiebeschrijving :
Purpose He checks and ensures that vital equipment on production sites is available as and when required. Qualifications required; The holder of this position must have the following qualifications: ✓ Equivalent of DUT/BTS (French), B.Sc. Mechanical/Instrumentation/Electrical Engineering (2.1), ✓ 5 years of general industrial maintenance ✓ Computer literacy is required, ✓ Ability to work offshore under the climatic conditions of the site, ✓ Ability to work in a multinational team. Ability to work in a service relationship. ✓ Competence/experience in the relevant specialities (mechanical/fitting, handling, tooling, electricity, instruments), ✓ Experience in CMMS ✓ Working language: English Bright 3.5 (or equivalent)

HSE ✓ Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules ✓ Ensures that COMPANY’s HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility, ✓ Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity GENERAL DESCRIPTION ✓ Support of offshore operations, ✓ Facilitate maintenance activities of the SITE team through adequate preparation (spare parts verification etc…) ✓ Check repairs requirement and quality ✓ Short- and medium-term improvement methods MAIN FUNCTIONS ✓ Review preventive maintenance program validity. Check availability of means to complete it as and when required. ✓ Assist the SITE as required for corrective maintenance ✓ Prepare work pack for specific maintenance job when requested ✓ Analyse CMMS report for his field of competence and recommend improvement solutions to COMPANY as required ✓ Set up and implement technical procedures, follow-up and update maintenance procedure in relation with COMPANY representatives, ✓ Ensures quality of the maintenance operations : preparation of intervention files, work orders, reporting, CMMS, ✓ Taken vibration measurements on site and analysis for Method Mechanical engineer
Plaats van tewerkstelling : GIRASSOL FPSO
Taal / Niveau :
Engels : C - Vloeiend
Taal / Niveau :
Frans : B - Goede beheersing

2026-43262 - CHEFE DE EQUIPA DE MECANICO* M/F

Thu, 07 May 2026 12:46:18 Z

2026-43256 - Project Architect * M/F

Thu, 07 May 2026 10:09:36 Z

Overeenkomst : Interim
Functiebeschrijving :
SPIE Services Nigeria Limited is currently looking for Project Architect (in- House) to join its work force in Nigeria. See Job description below SERVICE DIMENSION: The Project Architect serves as the Company's resident in-house architectural authority across all Company EP Nigeria Limited facilities in Nigeria. The role holder is responsible for the full architectural lifecycle of capital projects and facilities management services, from initial design concept through to construction supervision, quality assurance, and as-built documentation. This is a technically demanding, multi-site role requiring a seasoned professional who can independently manage complex briefs, engage with contractors and consultants to enforce design standards, and ensure that all built environments meet the Company's specifications, regulatory requirements, and best international practices in construction and infrastructure. ACTIVITIES: A. Architectural Design & Documentation Articulate, initiate and develop original conceptual architectural designs in response to project briefs and Company requirements. Produce detailed architectural drawings, including plans, sections, elevations, and specifications, across all project stages from concept to construction. Prepare shop drawings and change-control drawings during construction phases, ensuring alignment with approved designs. Review and validate architectural designs submitted by external consultants, verifying compliance with scope, specifications, and applicable standards. Maintain and update all architectural working documents to reflect evolving site conditions and approved variations. B. Construction Supervision & Quality Control Provide day-to-day on-site supervision of all architectural aspects of construction works across Company locations. Ensure strict adherence by contractors to approved construction drawings, specifications, and contract documents. Conduct quality assurance and quality control inspections on all architectural elements, identifying defects and non-conformances. Supervise the testing and approval of building materials and components to confirm compliance with specified standards. Prepare detailed site inspection reports, punch lists, and progress updates for Management review. C. Project Management Support Serve as the Company's resident site architect for both Special Projects and Facilities Management works. Provide technical guidance on construction methods, sequencing, and best-practice execution approaches. Verify that completed works conform strictly to approved-for-construction drawings prior to signing off. Carry out periodic reviews of architectural drawings and ensure timely updates as required throughout the project lifecycle. Ensure that all as-built drawings for Company facilities are accurately completed, filed, and maintained.

D. Standards, Compliance & Documentation Ensure all architectural deliverables conform to Company' internal specifications (COMPANY standards) and applicable industry best practices. Maintain a comprehensive and current record of all architectural drawings, specifications, and technical references for Company facilities. Support the development and continuous improvement of architectural standards and procedures within the Facilities Management function. Liaise with structural, mechanical, and electrical engineering teams to ensure coordinated, integrated design outputs. KPI Timely delivery of accurate architectural drawings and documentation at each project stage. Zero tolerance for non-conforming construction works proceeding without formal resolution or approved variation. Completeness and currency of as-built drawings for all Company facilities. Quality of site inspection reports and punch lists, measured by Management and contractor feedback. Compliance of completed works with approved-for-construction drawings, as verified at project sign-off. QUALIFICATIONS / EXPERIENCE REQUIRED Minimum of a Bachelor of Science (B.Sc.) degree in Architecture or equivalent qualification from a recognized institution. Registration with the Architects Registration Council of Nigeria (ARCON) is mandatory. Membership of the Nigerian Institute of Architects (NIA) or an equivalent professional body is an advantage. Minimum of 14 years' post-qualification work experience in an architectural or engineering consultancy or a comparable corporate environment. Demonstrated experience managing the full architectural lifecycle of major construction and infrastructure projects. Prior experience working within an oil and gas, energy, or large corporate multi-site environment is highly desirable.
Plaats van tewerkstelling : Port Harcourt, Nigeria
Taal / Niveau :
Engels : C - Vloeiend

2026-43026 - Contracts & Claims Engineer M/F

Thu, 30 Apr 2026 22:26:45 Z

Overeenkomst : Interim
Functiebeschrijving :
SPIE Services Nigeria Limited is currently looking for a Contracts & Claims Engineer to join its work force in Nigeria. Responsibilities include: Build EPNG Project Management System Provide support to define the method & tools related to contract management, claims and disputes management. Participate to definition methods for the entity (Contract toolbox, Competence requirement for contract engineers, expertise requirement, evaluation quiz...) Communicate, explain and raise awareness on the methods and tools, and contractual rigorousness. Control the contract management of the portfolio and prepare for Claim Provide guidance in identifying potential change orders and claims. Assist the project in drafting correspondences and notices to Contractors. Analysis and review of existing Claims: provide support to projects for existing Claims and corresponding resolution (contracts execution phase / close out phase), Provide higher understanding and recommendations for building the Claim dossiers / corresponding settlement. Provide expertise to projects When relevant may act as Contract engineer for some designated projects. Coach the contract engineers of the entity and Projects Portfolio (Assistance, advice, training...) Provide dedicated support during CFT or claim negotiation, Tender evaluation… Provide support to the project to build ad Hoc Decision support dossier for Contract Committee or VO approval Help project to navigate within HQ, TGP or the affiliate making sure internal stakeholder are well informed and consulted as required. Improve and learn from experience Contribute continuously to Contracts REX/Lessons Learnt consolidation. For each of the dossier, starting by screening the existing REX and when completing a dossier preparing main lessons learnt to be shared with other contract engineers and to be archived.

QUALIFICATIONS / EXPERIENCE REQUIRED Contract and procurement professional preferably in energy sector Professional Experience (number of years): 20 Experience within project (number of years): 15 Very Good understanding of all aspects of the project: planning, time impact, quantum, costs, risk management, project management, technical, local content… Essential personnel management skills (Teamwork, communication, coordination, delegation).
Plaats van tewerkstelling : Port Harcourt, Nigeria
Taal / Niveau :
Engels : C - Vloeiend

2026-43114 - PREPARADOR MECÂNICO* M/F

Mon, 27 Apr 2026 07:47:40 Z

Overeenkomst : Bepaalde duur
Functiebeschrijving :
General Description Support of offshore operations, Facilitate maintenance activities of the SITE team through adequate preparation (spare parts verification etc…) Check repairs requirement and quality Short and medium term improvement methods HSE: Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity Operations: Review preventive maintenance program validity. Check availability of means to complete it as and when required. Assist the SITE as required for corrective maintenance Prepare work pack for specific maintenance job when requested Analyze CMMS report for his field of competence and recommend improvement solutions to COMPANY as required Ensures quality of the maintenance operations: preparation of intervention files, work orders, reporting, CMMS

Theoretical Knowledge Basic understanding of oil & gas facilities and processes (well to export), including hydrocarbon risks (explosion, asphyxiation). Working knowledge of SAP for maintenance planning, work order preparation, material requisition, and history tracking. Proficient in basic computer use (Word, Excel, email, internet). Strong foundation in mechanical principles and process parameters (pressure, temperature, flow, density) and their impact on rotating and static equipment performance. Able to read and interpret P&IDs, isometric drawings, GA drawings, equipment datasheets, and vendor documentation. Equipment Knowledge Working knowledge of mechanical installation (filters, gear boxes, exchangers, air coolers, diesel engine, gas turbines, centrifugal and reciprocating pumps or compressors, common valve types (butterfly, gate, ball, cage and PSV) and hydraulic systems (cranes, HPU, pumps). Maintenance work preparation know-how Understand maintenance strategies and techniques, including: Preventive and corrective maintenance Alignment, tolerances, and clearances Basic condition monitoring concepts (vibration, temperature, leaks) Be able on a given preventive work order to prepare tools, spare parts and adapt procedure or work instruction. Basic understanding of process control interactions with mechanical systems, including how equipment responds to operational changes (start-up, shutdown, trips). Awareness of safety systems and interfaces with mechanical equipment, including ESD actions, relief systems, and isolation philosophy. Qualifications: Bacharelato em Engenharia Mecânica Has held as a minimum a Mechanical foreman position for up to 5 years in an offshore maintenance setting Computer literacy is required, Ability to work offshore under the climatic conditions of the site, Ability to work in a multinational team. Ability to work in a service relationship. Experience in CMMS
Plaats van tewerkstelling : Offshore Block 3/05
Taal / Niveau :
Portugees : C - Vloeiend
Taal / Niveau :
Frans : C - Vloeiend
Taal / Niveau :
Engels : C - Vloeiend

2026-43029 - Open Hole Gravel Pack ( OHGP ) Specialist M/F

Tue, 21 Apr 2026 22:28:34 Z

Overeenkomst : Bepaalde duur
Functiebeschrijving :
1. Review the engineering plan and program and translate them into rig work instructions. 2. Lead OHGP equipment QA/QC, including screen inspection, gravel specification compliance, tool redress verification, and job readiness checks. 3. Develop detailed OHGP operational plans: pump schedules, mechanical setting sequences, contingency procedures for bridging/losses, and pack-quality verification methodology. 4. Participate in and close out HAZOP/HAZID actions relevant to OHGP scope. 5. Conduct pre-mobilization equipment inspection and function testing. 6. Provide on-site OHGP execution support: troubleshoot pack efficiency issues, manage premature screen-outs, and monitor critical parameters in real time. 7. Perform post-job evaluation covering gravel pack quality, pack efficiency, carrier fluid performance, quality of returns, and confirmation of annular fill. 8. Capture lessons learned and recommend continuous improvement; update Wells Basis of Design (BoD) where applicable.

1. Minimum experience ten (10) years in offshore drilling rig operations. 2. At least the most recent five (5) years in supervisory roles. 3. Having valid certifications of : - IWCF/IADC Well Control (surface, appropriate level) - OPITO BOSIET with HUET & EBS - H2S/BA training 4. Familiar with Permit‑to‑Work (PTW), SIMOPS, and emergency response processes. 5. Having proficiency with software and templates (e.g., gravel‑pack design and modeling tools; well testing analysis suites; MS 365/SharePoint).
Plaats van tewerkstelling : jakarta
Taal / Niveau :
Engels : E - Moedertaal

2026-42814 - Tecnico de Grua* M/F

Tue, 21 Apr 2026 10:39:02 Z

Overeenkomst : Bepaalde duur
Functiebeschrijving :
HSE Complies with and applies the COMPANY’s HSE regulations particularly Permit to Work procedures, approved operating procedures, and standard industry practice during maintenance activities under supervision. Reports unsafe acts, conditions, and near misses to the supervisor. Petroleum: Have a basic understanding of offshore facilities and process systems. Demonstrates awareness of hydrocarbon behavior and associated risks (explosion, asphyxia…). Computer Skills: Able to produce basic report using Microsoft Word Able to perform simple calculations and data entry using Microsoft Excel. Able to use email and internet tools for work purposes. Physics: Understands and applies basic physical laws and units (forces, mass, energy, Newton’s laws). Has basic knowledge of materials and steels, including usage, mechanical resistance, corrosion mechanisms, and prevention methods. Engineering: Able to read and use basic engineering drawings (P&IDs, PFDs, isometrics). Able to interpret vendor documentation, nameplates, datasheets, tolerances, and adjustment figures. Able to produce clear and accurate hand sketches and drawings to scale. Equipment: Understands the working principles of crane‑related mechanical and hydraulic equipment, including:Filters Gear boxes Diesel engines Common valve types (butterfly, gate, ball, PSV) Crane hydraulic systems (crane hydraulic circuits, HPU, hydraulic pumps). Fully familiar with lubrication requirements and different types of lubricants. Familiarized with preventive maintenance tasks and their objectives. Aware of Condition‑Based Maintenance (CBM) techniques such as vibration monitoring and oil analysis, including their purpose and limitations. Maintenance: Understands preventive and corrective maintenance concepts and basic maintenance planning principles. Has basic knowledge of CMMS usage (issue notifications, read and complete work orders). Able to identify and correctly use mechanical measuring tools. Able to identify spare parts and follow appropriate procedures or work instructions.

Angolan national. Technical secondary education or vocational training in Mechanical Maintenance or related discipline. 0 to 3 years of experience in mechanical maintenance or industrial equipment maintenance; oil & gas experience is an advantage. Basic knowledge of diesel engines, hydraulic systems, gearboxes, and lubrication principles. Ability to use basic mechanical tools and follow maintenance procedures under supervision. Strong ability to read drawings and technical documentation. Strong awareness of HSE rules and willingness to comply with offshore safety requirements. Fluent in Portuguese; basic English knowledge required. Basic computer skills (Word, Excel, email). Medically fit and willing to work offshore under rotational schedules. Demonstrates motivation, discipline, and willingness to learn.
Plaats van tewerkstelling : Offshore Block 3/05
Taal / Niveau :
Engels : C - Vloeiend
Taal / Niveau :
Frans : C - Vloeiend
Taal / Niveau :
Portugees : C - Vloeiend

2026-42902 - Contrôleur de gestion H/F

Mon, 13 Apr 2026 09:05:19 Z

Overeenkomst : Bepaalde duur
Functiebeschrijving :
Concevoir et piloter des indicateurs de performance (KPI).  Suivre l’évolution des résultats financiers de l’entreprise et évaluer sa performance.  Proposer et mettre en œuvre des mesures correctives si necessaire.  Réaliser le suivi budgétaire et assure les clôtures comptables.  Mettre en place et contrôler les procédures internes.  Proposer des solutions d’optimisation de la rentabilité.  Conseiller l’entreprise en matière de gestion comptable et financière.  Élaborer le reporting vers la maison mère (carnet de commandes, compte de résultat, prévisions glissantes, crédit client, provisions).  Rapporter ses analyses à la Direction de la Filiale et au Siège, en expliquant les écarts constatés.  Participer à l’élaboration et à l’analyse des budgets et re-prévisions annuelles.  Contribuer aux revues d’affaires et aux appels d’offres ponctuels.  Participer à l’amélioration de l’ERP en lien avec la Direction Financière.  Assurer le lien avec les opérationnels pour leur fournir les informations financières nécessaires.  Remettre en place et suivre les procédures de contrôle de gestion local.  Assiste la Direction Financière lors des audits CAC et/ou interne, contrôle des administrations, ...

Formation supérieure en finance, comptabilité, contrôle de gestion ou école de commerce (Bac+3 à Bac+5). Expérience de 2 ans minimum en contrôle de gestion (stages inclus). Connaissance du secteur d’activité de l’entreprise (atout). Anglais professionnel souhaité. Comptabilité générale et analytique. Maîtrise des outils de contrôle de gestion et ERP (ex. IFS). Reporting et analyse financière. Sens de la rigueur et de l’organisation. Esprit de synthèse et d’analyse. Résistance au travail sous pression. Esprit d’initiative et proactivité.
Plaats van tewerkstelling : Base DPS, Rue Andrée GALLAIS, B.P. 579, Port-Gentil, Gabon
Taal / Niveau :
Frans : E - Moedertaal
Taal / Niveau :
Engels : E - Moedertaal

2026-42481 - Technicien expérimenté / Chef d'Equipe Machines Tournantes M/F

Sat, 11 Apr 2026 22:24:39 Z

Overeenkomst : International Contract
Functiebeschrijving :
coordonner l'équipe de techniciens en charge des activités d’expertise, de démontage, remontage et tests sur les machines tournantes (pompes, compresseurs, réducteurs, etc). Planifier, organiser et contrôler les opérations de maintenance préventive et corrective Suivi technique Garantir la conformité technique des interventions sur pompes, compresseurs et réducteurs selon les standards API 610 / 682 et exigences clients. Contrôler la qualité des interventions mécaniques (alignement, équilibrage, diagnostic) réalisées par ses équipes. Suivre l’état des pièces de rechange / stocks consommables et anticiper les besoins critiques. Réceptionner et contrôler les pièces détachées fournies par les clients et/ou le service Achat. Gestion & reporting Rédiger les rapports techniques après intervention comprenant les informations équipement, les rapports de métrologie / d’équilibrage, les tests de fin d’intervention, les photos, les observations et recommandations. Assurer le reporting auprès du Chef D’Atelier. Assurer la traçabilité documentaire (Rapport, fiche de réception, note d’entrée/sortie).

Expérience Minimum 5 ans d’expérience en maintenance mécanique et en atelier. Expérience confirmée sur machines tournantes (pompes, compresseurs, réducteurs). Expérience en environnement Oil & Gas / Pétrochimie fortement appréciée. Compétences techniques Maîtrise des techniques de maintenance (expertise, démontage, montage, équilibrage, test) des machines tournantes et des garnitures. Maîtrise des tolérances APIs. Maîtrise des outils de mesures, de métrologies, des techniques d’alignements, d’équilibrage et de diagnostic vibratoire. Lecture et interprétation de plans, schémas et spécifications techniques.
Plaats van tewerkstelling : Luanda, Atelier Pompe
Taal / Niveau :
Engels : C - Vloeiend

2026-42869 - Rigger de Grua (Crane Rigger)* M/F

Thu, 09 Apr 2026 08:53:38 Z

Overeenkomst : Bepaalde duur
Functiebeschrijving :
Operations Organises and executes rigging and lifting operations under his responsibility, ensuring safe and efficient execution. Supports planning activities by providing input on resources, lifting requirements, and execution strategies for rigging operations. Responsible to arrange and organize relevant materials and accessories from lay down area to work location. Assists the GMC team during lifting activities to ensure safe and effective execution of maintenance tasks. Ensures full compliance with QHSSE rules, Permit to Work (PTW), and approved lifting procedures. Maintains all rigging equipment, ensuring proper storage, certification, colour coding, and fitness for purpose. Participates in Job Hazard Analyses and Attend safety toolbox meetings on a daily basis with contractors' work teams. Supports control of lifting equipment certification and ensures all uncertified or defective equipment is quarantined. Works closely with Warehouse and Inspection teams for control, handling, and tracking of lifting equipment. Executes any additional tasks within his field of competence as directed by supervision. Planning & Methods Identifies critical or complex lifting operations during preparation stages and ensures appropriate risk assessments and lifting plans are developed. Monitors rigging equipment availability and highlights any shortages or quality issues to planning and support teams. Tracks backlog of rigging activities and proposes corrective actions when required. Identifies recurring lifting issues and recommends improvements to procedures and equipment. Quality Assurance & Control Performs regular site checks to ensure lifting operations are executed in accordance with procedures and standards.

Education & Certification Técnico Médio (Mechanical/Industrial) or equivalent technical qualification.Alternatively, completion of a recognised trade apprenticeship or certified rigging training scheme. Valid (or expired within 1 year) rigging and lifting certification approved by a competent authority. Certification in slinging, lifting operations, and use of lifting accessories is mandatory. Experience Minimum 5–8 years’ experience in rigging and lifting operations within oil & gas or heavy industrial environments. Minimum 2–3 years offshore experience, including lifting operations to/from support vessels. Experience supporting lifting operations for maintenance activities (GMC or similar) is an advantage. Technical Competencies Strong knowledge of rigging practices, lifting equipment, and lifting accessories (slings, shackles, hoists, beams). Ability to interpret lifting plans, load charts, and rigging drawings. Familiar with lifting equipment certification, colour coding systems, and inspection requirements. Understanding of lifting risk assessment and critical lift planning. Maintenance & Systems Experience in inspection, tracking, and control of rigging equipment and lifting accessories. Ability to maintain rigging registers/databases and monitor certification status. Familiarity with warehouse and logistics handling of lifting equipment. HSE & Compliance Good knowledge of QHSSE requirements, Permit to Work (PTW), and lifting safety standards. Strong safety awareness with ability to identify hazards and ensure compliance with lifting procedures. Behavioural Skills Ability to coordinate with Operations, Marine, Inspection, and Logistics teams. Good communication and reporting skills (basic English required). Physically fit and capable of working in offshore conditions.
Plaats van tewerkstelling : Offshore Block 3/05
Taal / Niveau :
Portugees : C - Vloeiend
Taal / Niveau :
Frans : C - Vloeiend
Taal / Niveau :
Engels : C - Vloeiend

2026-42841 - QAQC Inspector M/F

Tue, 07 Apr 2026 15:43:40 Z

Overeenkomst : International Contract
Functiebeschrijving :
Ø Monitor key performance indicators and quality targets, in coordination with the QMS, identifying improvement opportunities. Ø Follow up and Conduct Internal/external Audit (ISO, API ) when requested Ø Follow up and Conduct Internal /External Audit for Company Qualified Licensee. (Vam,Tenaris , NOV Grand Prideco Ø Verifications of document control as per Licensee procedure and upload to web site Licensee. Ø Follow up and investigate NCR internal and external opening. Ø Traceability of Incoming / outgoing documentation works order Client. Ø Strictly adhere to company’s rules, regulations and code of ethics Ø Share work and perform the inspection to the standard procedure and/or specified by Client request. Ø Review and prepare final report and/or certificate of conformity in a timely manner and assure its immediate dispatch to the Client. Ø Delivery of the W.O. file with all documentation to Finance department for Invoice Process. Ø Weekly report of the Quality department performance. Ø Control and records the use of gauges Ø Ensure gauges used in the shop are calibrated Ø Conduct dimensional and final inspection of tools. Ø Conduct inspection of surface treated (phosphate, cold rolling, and sand blasting) tools as well as give technical advice on surface treatment processes. Ø Ensure identification and traceability of tools and other customer properties. Ø Ensure proper filing and control of approved inspection and tally reports Ø Participate in the identification of nonconforming products Ø Maintain Gauges Control register for calibration update and interface with Logistics department & for Gauge handling to and from Licensors and/or calibration shops. Ø Knowledge of Make-up operations.

Ø License degree or technical Diploma: Electronics, Mechanical Ø Mechanical Background knowledge Ø Computer literate (Microsoft word, excel, power point) Ø Lead Auditor certificate will be an Advantage · Minimum 3/ 5 Years on the same position. ü API Q1 & Q2 knowledge ü ISO 9001 Quality Management System last edition ü OCTG, BHA, Drilling Equipment Inspection. ü Premium Connection Vam, Tenaris , Nov Grand Prideco ü T.H. DS-1 ü Calibration equipment. ü Handling and care of OCTG, Drilling equipment and BHA.
Plaats van tewerkstelling : Luanda, Machine Shop
Taal / Niveau :
Engels : D - Zakelijk vloeiend

2026-42818 - OPERADOR DE GRUA (CRANE OPERATOR)* M/F

Mon, 06 Apr 2026 10:58:10 Z

Overeenkomst : Bepaalde duur
Functiebeschrijving :
Operations Executes lifting operations as directed, including material transfer to/from support vessels, equipment handling, and offloading activities. Operates cranes, winches, forklifts, and other lifting/handling equipment in a safe and efficient manner. Organises and performs rigging and lifting activities under his responsibility, ensuring compliance with approved procedures and lifting plans. Ensures all lifting operations are conducted in accordance with QHSSE requirements, site procedures, and instructions from authorised personnel. Works closely with Logistics and Marine teams to ensure safe and efficient execution of lifting activities. Participates in pre-job risk assessments (JSA) and strictly follows all safety recommendations. Reports all incidents, near misses, and unsafe conditions to supervision and COMPANY. Ensures work areas are left clean and safe after completion of activities. Maintenance & Equipment Performs first-line maintenance and routine inspections on cranes and lifting equipment, reporting any anomalies to the Mechanical Supervisor. Assists in maintenance and minor repairs of lifting devices as required. Supports third-party inspection and certification activities, including use of water bags and load testing equipment. Ensures all lifting tools and equipment are maintained in safe and operational condition. Support Activities Provides assistance in rigging, lifting operations, and general handling activities as required. Supports mechanical team activities during non-lifting periods, as directed by supervision. Methods & Continuous Improvement Reports daily maintenance findings and operational feedback to supervision. Identifies recurrent issues and proposes improvements to procedures and equipment reliability. Ensures proper use of PPE and adherence to all safety procedures at all times.

Education & Certification Técnico Médio (Industrial/Mechanical) or equivalent technical qualification.Alternatively, completion of a recognised trade apprenticeship or certified technician training scheme. Valid or expired (within last 2years) offshore crane operator certification approved by a competent authority (e.g., BS 7121 or equivalent). Valid forklift and lifting equipment operator certifications. Experience Minimum 5 years’ experience in crane and lifting operations within oil & gas or heavy industrial environments. Minimum 3 years’ experience offshore, with proven involvement in:Lifting operations to/from support vessels and marine units Offshore material handling and equipment transfer Execution of lifting activities under Permit to Work (PTW) conditions Demonstrated experience in maintenance and first-line inspection of cranes and lifting equipment. Experience with critical lifting operations and adherence to approved lifting procedures and safety standards. Technical Competencies Strong knowledge of rigging and lifting operations, including lifting plans and safe load handling. Ability to operate cranes, winches, forklifts, and other lifting equipment safely and efficiently. Familiarity with inspection and basic maintenance of lifting equipment and accessories. Understanding of load testing activities (e.g., water bags, load cells) is an advantage. HSE & Compliance Good understanding of lifting safety standards, Permit to Work (PTW), and site procedures. Demonstrates strong safety awareness and adherence to QHSSE requirements at all times. Practical & Behavioural Skills Skilled in handling and operating various lifting and handling equipment. Ability to work effectively in a team and maintain good relationships with colleagues and contractors. Capable of working in offshore conditions and physically fit for site activities. Basic communication and reporting skills (English required).
Plaats van tewerkstelling : Offshore Block 3/05
Taal / Niveau :
Portugees : C - Vloeiend
Taal / Niveau :
Frans : C - Vloeiend
Taal / Niveau :
Engels : C - Vloeiend

2026-42817 - SUPERVISOR DE TURBINA* M/F

Mon, 06 Apr 2026 10:56:07 Z

Overeenkomst : Bepaalde duur
Functiebeschrijving :
Main activities: Ensures full compliance with QHSSE rules, Permit to Work (PTW), and site operating procedures during all maintenance activities. Organises, plans, and supervises maintenance and troubleshooting activities on turbine-driven equipment (turbo-generators and turbo-compressors) and associated auxiliary systems. Provides technical support to the preparation and planning team for maintenance activities, including scope definition, resource requirements, and intervention strategies. Leads field teams during interventions, ensuring adherence to procedures, quality standards, and operational priorities. Takes full ownership of turbine systems under his responsibility in case of breakdown, ensuring rapid fault diagnosis, resolution, and restoration to normal operating conditions with minimal production impact. Manages and ensures availability, control, and proper use of specialised tools and equipment required for turbine maintenance. Prepares and validates detailed technical reports, including intervention feedback, failure analysis, and recommendations. Identifies recurrent failures, performs root cause analysis (RCA), and proposes corrective and preventive actions to improve reliability and availability. Interfaces with Operations, Electrical, and Instrumentation teams to ensure integrated system performance and safe restart of equipment. Contributes to achieving technical and maintenance KPIs, including equipment availability, reliability, and reduction of unplanned shutdowns. Specific activities Ensure that the transfer of knowledge by mentoring occurs properly within his teams, and actively participates in the OJT / assessment program. Mechanical Specific: Responsible for maintenance and performance of:3 × Turbo-generators (Nuovo Pignone MS5001 gas turbines coupled with GEC Alsthom T500 generators) 3 × Turbo-compressors (Thermodyn RC/RB)

Qualification: Minimum qualification level required is Licenciatura or Técnico Médio in Mechanical Engineering Theoretical Knowledge Strong understanding of oil & gas processes and production systems, including hydrocarbon risks. Good foundation in rotating equipment principles, including gas turbines, compressors, and generators. Ability to read and interpret P&IDs, mechanical drawings, and vendor documentation. Understanding of control and protection systems (ESD, alarms, trips, interlocks). Equipment Knowledge In-depth knowledge of turbine-driven equipment: turbo-generators and turbo-compressors, including auxiliaries (lube oil, fuel gas, seal gas, cooling systems). Familiar with vibration monitoring and condition monitoring systems. Understanding of mechanical and control interfaces with electrical and instrumentation systems. Maintenance & Systems Strong experience in preventive, corrective, and predictive maintenance of rotating equipment. Working knowledge of CMMS (e.g., SAP PM): planning inputs, execution follow-up, and reporting. Ability to support job preparation, including scope definition, tools, spares, and procedures. Practical & Supervisory Skills Proven ability to organise, supervise, and coordinate field teams during maintenance and troubleshooting activities. Strong fault diagnosis capability and ownership of breakdown situations until full restoration. Effective use of specialised tools and alignment, inspection, and testing equipment. Maintenance Know-How Ability to troubleshoot and maintain turbine systems and driven equipment (generators and compressors). Capable of analysing failures, identifying recurring issues, and proposing corrective actions (RCA mindset). Ensures safe restart and operational readiness of equipment after intervention. HSE & Compliance Ensures strict adherence to PTW, LOTO, and site QHSSE procedures. Promotes safe working practices and compliance with industry standards.
Plaats van tewerkstelling : Offshore Block 3/05
Taal / Niveau :
Portugees : C - Vloeiend
Taal / Niveau :
Frans : C - Vloeiend
Taal / Niveau :
Engels : C - Vloeiend

2026-42816 - CHEFE DE EQUIPA DE INSTRUMENTACAO* M/F

Mon, 06 Apr 2026 10:55:00 Z

Overeenkomst : Bepaalde duur
Functiebeschrijving :
Operations: Organises and performs on site the maintenance operations which are placed under his responsibility, Ensures strict compliance with COMPANY HSE policies, including adherence to Permit to Work (PTW) procedures, isolation standards, and approved operating procedures. Leads and coordinates field technicians during maintenance and troubleshooting activities, ensuring work is executed safely, efficiently, and in accordance with industry best practices. Enters intervention reports in the CMMS (including those concerning SMC) and writes the technical reports related to his field, Prepares detailed technical reports, including failure analysis, root cause identification, and corrective/preventive recommendations. Carries out, at the Supervisor request, any intervention within his field of competence. Performs advanced fault diagnosis and takes in charge the systems under his responsibility in case of breakdown, ensuring timely restoration to normal operating conditions.

Theoretical Knowledge Basic understanding of oil & gas facilities and processes (well to export), including hydrocarbon risks (explosion, asphyxiation). Proficient in basic computer use (Word, Excel, email, internet). Strong foundation in process physics (temperature, pressure, volume, density, specific gravity). Able to read and interpret P&IDs, loop diagrams, ESD matrices, datasheets, and vendor documentation. Understanding of control and regulation principles (simple, cascade, split range) and basic logic (AND/OR). Familiar with PCS, F&G, and ESD systems, including alarms, trips, and inhibits. Equipment Knowledge Good understanding of instrumentation: pressure, temperature, level, flow and interface measurement devices. Knowledge of metering systems (orifice, coriolis, turbine). Understanding of pneumatic, hydraulic, and basic electrical systems (SOVs, relays, timers). Familiar with control valves, positioners, and PSV principles. Knowledge of Fire & Gas detection systems (flame, gas, smoke). Maintenance & Systems Understanding of preventive, corrective, and predictive maintenance concepts. Basic CMMS knowledge: creating notifications, reading and completing work orders, identifying tools, spares, and procedures for maintenance tasks. Practical Skills Competent in use of hand tools and workshop equipment. Skilled in tubing, fittings, gaskets, seals, and cable terminations. Proficient in use of test and calibration tools: multimeters, calibrators, deadweight testers, temperature baths, hydraulic pumps. Maintenance Know-How Able to perform loop checks from field devices to control systems (PCS/ESD). Capable of calibration, testing, installation, and troubleshooting of transmitters (pressure, level, temperature, flow). Able to calibrate and maintain control valves and positioners. Experience in testing and maintaining Fire & Gas detection systems, ensuring proper inhibit management.
Plaats van tewerkstelling : Offshore Block 3/05
Taal / Niveau :
Portugees : C - Vloeiend
Taal / Niveau :
Frans : C - Vloeiend
Taal / Niveau :
Engels : C - Vloeiend

2026-42815 - CHEFE DE EQUIPA DE ELECTRICIDADE* M/F

Mon, 06 Apr 2026 10:53:50 Z

Overeenkomst : Bepaalde duur
Functiebeschrijving :
Operations: Organises and performs on site the maintenance operations which are placed under his responsibility, Ensures strict compliance with COMPANY HSE policies, including adherence to Permit to Work (PTW) procedures, isolation standards, and approved operating procedures. Leads and coordinates field technicians during maintenance and troubleshooting activities, ensuring work is executed safely, efficiently, and in accordance with industry best practices. Enters intervention reports in the CMMS (including those concerning SMC) and writes the technical reports related to his field, Prepares detailed technical reports, including failure analysis, root cause identification, and corrective/preventive recommendations. Carries out, at the Supervisor request, any intervention within his field of competence. Performs advanced fault diagnosis and takes in charge the systems under his responsibility in case of breakdown, ensuring timely restoration to normal operating conditions.

Theoretical Knowledge Basic understanding of oil & gas facilities and processes (well to export), including hydrocarbon risks (explosion, asphyxiation). Proficient in basic computer use (Word, Excel, email, internet). Solid foundation in electrical physics: resistance, inductance, AC/DC systems, voltage levels, frequency, active/reactive power. Able to read and interpret electrical drawings (single-line diagrams, schematics), nameplates, and symbols. Knowledge of cable sizing, voltage drop, and general electrical network philosophy (generation, emergency power, switchboards, UPS). Understanding of load shedding/sharing, interlocking, and inter-tripping systems. Basic knowledge of cathodic protection and PLC logic (AND/OR, timers, alarms, trips). Familiar with electrical protection systems (short circuit, overload, earth fault, reverse power). Understanding of earthing systems (IT, TT, TN). Knowledge of main electrical equipment and maintenance principles: motors, transformers, alternators, UPS, batteries, switchboards, soft starters, and protection devices. Awareness of condition-based maintenance (e.g., thermography). Maintenance & Systems Understanding of preventive, corrective, and predictive maintenance concepts. Basic CMMS knowledge: creating notifications, reading and completing work orders, identifying tools, spares, and procedures for maintenance tasks. Practical Skills Competent in the safe use of electrical hand tools (including insulated tools). Familiar with cable installation practices: laying, glanding, termination, tagging, and routing (trenches, trays). Proficient in using electrical test equipment: multimeters, clamp meters, insulation testers (megger), earth testers. Maintenance Know-How Able to troubleshoot and maintain small electrical systems (lighting, heat tracing). Capable of cable identification, termination, and installation. Performs preventive maintenance on electrical equipment (motors, transformers, breakers, batteries, switchboards). Able to test alarms, trips, interlocks, and perform insulation/continuity tests. Capable of dismantling, repairing, reassembling, and testing LV electrical equipment.
Plaats van tewerkstelling : Offshore Block 3/05
Taal / Niveau :
Portugees : C - Vloeiend
Taal / Niveau :
Frans : C - Vloeiend
Taal / Niveau :
Engels : C - Vloeiend

2026-42796 - Shutdown Valves Specialist M/F

Thu, 02 Apr 2026 13:27:43 Z

Overeenkomst : International Contract
Functiebeschrijving :
The role is to ensure the preparation, coordination, and follow-up of valves maintenance activities during shutdowns and maintenance operations. Key Responsibilities Work Preparation Identify and analyze the scope of valves to be handled Prepare detailed work packs, including: work procedures method statements spare parts requirements specific tools and equipment Define required resources (workforce, skills, equipment) Valve Scope Management Manage different types of valves: manual valves motor-operated valves (MOV) safety valves (PSV, ESD valves) Planning & Coordination: Work closely with shutdown planning team Integrate valve activities into the overall shutdown schedule HSE, Risk & Lifting Integrate HSE requirements into all preparation activities Identify risks related to valve interventions (pressure, fluids, gas exposure) Define appropriate mitigation measures Integrate lifting activities into work packs: load identification selection of lifting equipment coordination with lifting teams Ensure compliance with lifting and safety standards Execution Support & Follow-up Provide technical support during execution Manage field deviations and update work packs when required Monitor progress of valve activities Participate in lessons learned and feedback processes

• 3 to 5 years of experience in industrial maintenance • Proven experience in valve maintenance • Experience in shutdown / Oil & Gas environment • Ability to read technical documentation: o P&IDs o isometric drawings o datasheets • Solid understanding of lifting operations (lifting & rigging): o basic lifting plan interpretation o risk identification o coordination with lifting teams
Plaats van tewerkstelling : LAGOS - Client's office
Taal / Niveau :
Engels : D - Zakelijk vloeiend