RSS-export van de vacatures - Seulement les offres à la une : Nee / Zone géographique : Afrique / Pays : Afrique-->Gabon

2026-43350 - Instrumentation Maintenance Specialist M/F

Fri, 03 Jul 2026 22:16:04 Z

Overeenkomst : Bepaalde duur
Functiebeschrijving :
SPIE Global Services Energy is currently looking for Instrumentation Maintenance Specialist to join its workforce here in Nigeria on ERHA project. Key Responsibilities: Instrumentation Maintenance – FPSO Scope Perform preventive, predictive, and corrective maintenance on FPSO instrumentation including:Pressure, temperature, flow, and level transmitters Process and utilities instrumentation Fiscal and allocation metering instrumentation Analytical systems (GCs, water cut, BS&W, H₂S, O₂, moisture, pH/conductivity) Maintain and troubleshoot control valves and final control elements (pneumatic, hydraulic, electric actuators, ESD valves, MOVs interface instrumentation). Diagnose and resolve control loop issues from field device through I/O, PLC/DCS, to final element. Support FPSO-specific systems such as: Cargo, offloading, and marine systems instrumentation Utilities (power generation, water treatment, air, nitrogen), Turbine and compressor package instrumentation, Tank gauging and custody transfer support systems Execute and document work in the CMMS (SAP), maintaining accurate history and technical feedback. Control & Safety-Critical Systems Maintain and test Safety Instrumented Systems (SIS) including: ESD (Process, Marine & Utilities), Fire & Gas detection systems Conduct Safety Integrity Level proof testing, functional testing, loop checks, and cause‑and‑effect verification in line with site procedures. Support DCS/PLC systems through I/O checks, signal verification, field interface troubleshooting, and commissioning support. Participate in MoC, FAT, SAT, startup, shutdown, and FPSO life‑of‑field modifications. Mentoring, Coaching & Training (Core Expectation) Act as a technical mentor for offshore instrumentation technicians, providing hands‑on coaching, job guidance, and technical leadership. Support competence assurance programs by: Identifying skill gaps Coaching technicians through task-based assessments Verifying work quality and safe execution Deliver on-the-job training in: Calibration techniques and best practices Control valve maintenance and diagnostics Analyzer maintenance and sample systems SIS and Fire & Gas testing procedures Promote consistency and quality by:Reviewing completed work and documentation Reinforcing standards, procedures, and good engineering practice Capture and share lessons learned, recurring failure modes, and best practices to improve team capability and reduce repeat failures.

Key Competencies Technical Competencies Advanced knowledge of FPSO instrumentation and control systems. Strong diagnostic and troubleshooting capability under offshore operational constraints. Working knowledge of DCS/PLC systems, field communication protocols (4–20 mA, HART, Fieldbus, Modbus). Experience maintaining SIS, Fire & Gas, and ESD systems. Proficient with calibration and diagnostic tools and valve diagnostic equipment. Coaching & Leadership Competencies Proven ability to mentor and develop technicians in a live production environment. Clear communicator, able to explain complex concepts practically and safely. Leads by example in safety, work quality, and professional conduct. Committed to knowledge transfer and sustaining offshore competence. Behavioral Competencies Safety‑first mindset and strong risk awareness. Calm, methodical problem-solving under pressure. Team-oriented, able to work effectively with Operations, Marine, Electrical, and Engineering teams. Qualifications & Experience Education: Diploma/HND/B.Sc. in Instrumentation & Control, Electrical/Electronics, Mechatronics, or related discipline. Experience: 7–10+ years experience in instrumentation maintenance within oil & gas or similar process industries. Demonstrated FPSO or offshore production facility experience. Proven experience mentoring or training technicians offshore. Certifications (Mandatory / Preferred): CompEx or IECEx certification Offshore survival and medical certification (BOSIET/FOET or equivalent) Functional Safety (IEC 61511 / TÜV – preferred) OEM training (Emerson, ABB, Siemens, Yokogawa, Honeywell, Endress+Hauser)
Plaats van tewerkstelling : OFFSHORE
Taal / Niveau :
Engels : D - Zakelijk vloeiend

2026-43966 - Telecoms Projects & Operations Engineer *(M/F) M/F

Thu, 02 Jul 2026 15:43:07 Z

Overeenkomst : Interim
Functiebeschrijving :
SPIE Services Nigeria Limited is currently looking for Telecoms Projects & Operations Engineer to join its work force in Nigeria. Responsibilities include: Job Responsibilities: Carry out technical engineering studies for the design, installation and standardization of Telecom systems, mast, earthing, etc. in line with specifications and GS TEL installation rules. Operation and maintenance of the following field systems and equipment: PA/GA, CCTV, GMDSS, Access control, Radar with AIS, UHF/VHF Radios, Satellite TV, Line of site/non-line of site microwave links: WiMAX, 4G/LTE, Radar Beacon (RACON), Non-Directional Beacon (NBD), Video conference, Infrastructure monitoring systems Prepares technical specifications and scope of work to approved standards for various Telecoms projects (O&G, evolution/revamp), evaluate technical bids and prepares evaluation reports and supervise the project deployment. Prepare specifications for telecommunications service contracts and required equipment/services needed to perform the Annual Maintenance Contract for Telecoms critical equipment to maintain high availability and reliability. Carry out routine telecommunication assessment visit and propose improvements Supervise offshore Telecom specialists and assist in carrying out of maintenance activities on Telecom systems Prepare technical reports, assisting in development of the 5-year work program, evaluating equipment obsolescence and propose replacement plan, update engineering and technical documents and manuals. Preparation of technical dossier (Scope of work) to request for quotation from contractors regarding telecommunication projects, and specific operations on systems. Propose Improvement of the quality of service provided by the Telecommunication Contractors for systems maintenance. Participate in supervision of third-party contractor on site to ensure compliance to installation rules Recommend and implement appropriate solutions for operational problems/anomalies of Telecommunication Equipment/Systems at Field. Actively participate in FAT, Commissioning activities for all Telecoms equipment and systems, and prepares punch lists and follow-up the progress of the punch list. Participates in various commercial activities as required, coordinates the inspection of materials, evaluates technical off

QUALIFICATIONS/EXPERIENCE/SKILLS REQUIRED Minimum University degree B.Sc. (Second Class lower) or HND (Distinction) degree in Electrical, Electronics or Computer Engineering. "15years of hands-on experience in both Enterprise Data-Network Environment & Operational Projects Management" Minimum 5 years’ experience in telecommunication or network engineering, operation, and maintenance. Good reporting, interpersonal and communication skills. Knowledge and use of computer drawing and office applications.
Plaats van tewerkstelling : Port Harcourt, Nigeria
Taal / Niveau :
Engels : C - Vloeiend

2026-43694 - Offshore Training Coordinator M/F

Thu, 02 Jul 2026 07:30:31 Z

Overeenkomst : Bepaalde duur
Functiebeschrijving :
SPIE Global Services Energy is currently looking for Offshore Training Coordinator to join its workforce in Angola. Key Responsibilities Include: HSE Provide the basic knowledge necessary to work on the FPSO and confirm the acceptance level is met. Propose all relevant training actions to improve the individual/group efficiency or the H.S.E awareness of the operators. Provide training on Operational Discharge Management Plan and ISO 14001 Management on site. Organize the collaborators to do the Safe pass mandatory training and follow-up. TRAININGS Organize the agreed training sessions, lead the training, and oversee the validation of the training modules. Update the training assessment of the DP17/FO personnel on the FPSO and propose necessary corrective actions. Update and maintain training documentation and provide regular copy to the COMPETENCIES AND TRAINING Service. Manage the training documentation (slides, supporting write-up, quiz, training manual) with the support of assistants and technicians.

Update the training matrix necessary based on the modifications of the facilities initiated. Propose the modifications to the Training Department to update the training files. Organize and participate in training sessions for plant Shutdown or Restart. Organize training related to PTW and Standing Instructions. Organize and train new operators and perform contextualized OJT & JOB TASK LIST if requested. Conduct field visit regarding training documentation to update the documentation line.
Plaats van tewerkstelling : offhsore - luanda
Taal / Niveau :
Engels : C - Vloeiend

2026-43907 - Security & Logistics Coordinator *(M/F) M/F

Mon, 29 Jun 2026 22:27:10 Z

Overeenkomst : Interim
Functiebeschrijving :
SPIE Global Services Energy is looking for Security & Logistics Coordinator to join its workforce in Nigeria. JOB PURPOSE Support the IMA Project in achieving security objectives by providing technical and operational expertise in security operations and administration, facilitate the project operations by ensuring Land transportation of company personnel, partners and other stakeholders. Responsibilities shall include: Advise on security matters across all phases of IMA project development. Coordinate and supervise the project site security team. Conduct security risk and vulnerability assessments; implement security strategies. Contribute to the preparation of Logistics and security budgets / Bills of Quantities (BoQs). Drive innovation and continuous improvement in security practices. Prepare and maintain security documentation; provide up-to-date security guidance to project personnel. Review contractors’ security plans and develop bridging documents for shared responsibilities. Deliver security inductions for personnel and Government Security Forces (GSF). Identify and address international and national security requirements affecting the project. Audit and review company and contractor security activities, equipment, and sites. Follow up on security audit recommendations and facilitate security drills. Ensures provision of land transportation for movement of company personnel and goods from one place to another purposely for the project Ensures all land transportation for the project is operated in conformity with the Company LTMS and HSE/Driving Policy Ensures the daily management of drivers to maintain cordial industrial harmony in the company. Timely preparation of drivers’ monthly HSE meeting in liaison with the FM&A team, safety training, leave schedules and monitor implementation. Oversees the Supply, Installation, Maintenance of IVMS (In-Vehicle Monitoring System) and /or Driving Improvement & Monitoring System (DIMS) and Monthly downloaded IVMS/DIMS report follow up Carries out detailed investigation of road transport incidents in conjunction with relevant FM&A Transport QA/QC Officer, HSE department and keeps records of accidents Prepares activity report on land transport and makes recommendations to the Manager, Travels Management on land transport matters. Liaise with the site security team to plan and execute security exercises.

Ensure compliance with all TotalEnergies Affiliate and Project security policies, with particular attention to the Company Security Management System Monitor and controls transport operations for the project to ensure safety of personnel lives, other road users and goods Constant education and training of project drivers towards safe and defensive driving behaviour as well as accountable for sanctions policy implementation Manages the Supply, Installation and Maintenance of DIMS and/or IVMS for the project fleet.
Plaats van tewerkstelling : Port Harcourt, Nigeria
Taal / Niveau :
Engels : D - Zakelijk vloeiend

2026-43872 - Gas Turbine Specialist Engineer M/F

Mon, 29 Jun 2026 22:26:21 Z

Overeenkomst : International Contract
Functiebeschrijving :
SPIE Global Services Energy is currently looking for a Gas Turbine Specialist Engineer to join its work force in Angola. Key Responsibilities: Review the gas turbine maintenance strategy, annual plan, operating hour-based requirements, inspection forecasts, major maintenance windows, and long-lead intervention needs. Prepare detailed work packs and readiness plans for gas turbine inspections, borescope inspections, hot section inspections, combustion inspections, package maintenance, component change-outs, and major maintenance events. Define task sequence, hold points, critical path, manpower, duration, tools, lifting requirements, access needs, isolations, preservation, testing, start-up, performance checks, and recommissioning requirements. Identify and validate OEM parts, exchange components, consumables, filters, seals, gaskets, lubricants, instrumentation items, special tools, test equipment, lifting accessories, and preservation materials. Coordinate OEM/vendor technical clarifications, service bulletins, intervention procedures, field service requirements, mobilization documentation, offshore certifications, and execution prerequisites. Follow up PRs, POs, long-lead parts, repair/exchange logistics, vendor mobilization readiness, shipment readiness, and interface constraints affecting gas turbine campaigns. Support warehouse verification, preservation control, segregation, bagging, tagging, boxing, packing list preparation, and shipment readiness for gas turbine materials and special tools. Interface with rotating equipment, mechanical, electrical, instrumentation, operations, reliability, HSE, procurement, logistics, marine, OEMs, and offshore teams to integrate gas turbine scopes into FPSO execution plans. Support offshore execution by monitoring progress, resolving technical issues, assessing deviations, reviewing vendor reports, tracking findings, and converting recommendations into actionable work orders or material requests. Gas turbine maintenance preparation dossiers, OEM readiness trackers, major intervention work packs, special tool and spare parts matrices, long-lead procurement trackers, mobilization readiness checklists, execution support reports, vendor report follow-up registers, and post-intervention action trackers.

Engineering degree or equivalent senior technical qualification in mechanical, rotating equipment, turbomachinery, or related discipline, with demonstrable experience in gas turbine maintenance planning and major interventions in oil and gas, preferably FPSO or offshore environments. Experience with OEM-supported gas turbine maintenance, such as Solar or Baker Hughes/GE packages or equivalent, is strongly preferred.
Plaats van tewerkstelling : Luanda
Taal / Niveau :
Engels : C - Vloeiend

2026-43868 - Mechanical Maintenance Planning Engineer M/F

Mon, 29 Jun 2026 22:26:12 Z

Overeenkomst : International Contract
Functiebeschrijving :
SPIE Global Services Energy is currently looking for a Mechanical Maintenance Planning Engineer to join its work force in Angola. Review annual, monthly, and look-ahead mechanical maintenance plans and identify work orders requiring detailed preparation, material readiness, vendor support, access, lifting, isolation, or logistics coordination. Create, update, and enrich mechanical work orders in the CMMS/ERP system, including task sequence, manpower, duration, tools, spare parts, consumables, lifting needs, permit considerations, reinstatement steps, testing requirements, and close-out criteria. Prepare work packs for pumps, valves, PSVs, heat exchangers, cranes, static equipment, hydraulic systems, utilities, marine mechanical equipment, and associated mechanical packages. Identify, validate, and map spare parts, consumables, gaskets, seals, fasteners, lubricants, repair kits, special tools, and hand tools required for mechanical scopes. Support material master creation and BOM improvement by providing accurate technical descriptions, OEM references, manufacturer details, storage requirements, and equipment linkage. Follow up PRs, POs, technical clarifications, vendor quotations, expediting actions, warehouse availability, and material shortages that may affect mechanical work execution. Conduct warehouse verification, bagging, tagging, boxing, preservation checks, packing list preparation, and shipment readiness for mechanical materials and tools. Interface with maintenance, operations, reliability, warehouse, logistics, procurement, HSE, marine, vendors, and offshore supervisors to align mechanical work readiness and execution methodology. Support offshore execution by resolving technical queries, monitoring progress, assessing changes, capturing lessons learned, and converting accepted findings into new work orders or material requests.

Engineering degree or equivalent technical qualification in mechanical engineering, with proven offshore oil and gas or FPSO maintenance planning experience. The candidate shall demonstrate strong knowledge of CMMS/ERP systems, mechanical equipment maintenance, work pack preparation, spare parts identification, vendor coordination, HSE requirements, and offshore logistics constraints.
Plaats van tewerkstelling : Luanda
Taal / Niveau :
Engels : C - Vloeiend

2026-43867 - Compressor Specialist Engineer M/F

Mon, 29 Jun 2026 22:26:11 Z

Overeenkomst : International Contract
Functiebeschrijving :
SPIE Global Services Energy is currently looking for a Compressor Specialist Engineer to join its work force in Angola. Key Responsibilities: Review compressor maintenance strategies, equipment history, operating hour requirements, reliability findings, annual plans, backlog, and campaign requirements to identify preparation needs and execution risks. Prepare detailed work packs and readiness plans for centrifugal, reciprocating, screw, or package compressors as applicable, including inspections, overhauls, seal replacements, valve works, lubrication systems, coolers, auxiliaries, and control-related interfaces. Define task sequence, manpower, duration, special tools, lifting requirements, isolation requirements, access needs, alignment checks, preservation, testing, leak checks, functional testing, recommissioning, and close-out requirements. Identify and validate OEM spare parts, seal kits, bearings, filters, gaskets, lubricants, valves, instrumentation items, repair kits, special tools, test equipment, lifting accessories, and consumables required for compressor scopes. Coordinate vendor/OEM technical clarifications, field service requirements, intervention procedures, service reports, repair recommendations, mobilization documentation, and offshore readiness prerequisites. Follow up PRs, POs, long-lead items, repair/exchange logistics, vendor mobilization, workshop interfaces, warehouse readiness, and shipment preparation for compressor interventions. Support warehouse verification, preservation checks, segregation, bagging, tagging, boxing, packing lists, and shipment readiness for compressor materials, components, and tools. Interface with rotating equipment, mechanical, electrical, instrumentation, operations, reliability, HSE, procurement, logistics, marine, OEMs, and offshore teams to ensure compressor scopes are fully integrated into campaign and routine execution plans. Support offshore execution by monitoring progress, resolving technical issues, assessing deviation impacts, reviewing vendor reports, tracking findings, and creating follow-up work orders or material requests from accepted recommendations. Compressor maintenance preparation dossiers, compressor work packs, OEM readiness trackers, spare parts and special tool matrices, long-lead procurement trackers, mobilization readiness checklists, execution support reports, vendor report follow-up registers, and post-intervention action trackers.

Engineering degree or equivalent senior technical qualification in mechanical, rotating equipment, turbomachinery, or related discipline, with demonstrable experience in compressor maintenance planning, troubleshooting support, and major interventions in oil and gas, preferably FPSO or offshore environments. Experience with OEM-supported compressor packages, including Baker Hughes/GE, Solar, MAN, Dresser-Rand, or equivalent equipment, is strongly preferred.
Plaats van tewerkstelling : Luanda
Taal / Niveau :
Engels : C - Vloeiend

2026-43866 - Instrumentation and Control Maintenance Planning Engineer M/F

Mon, 29 Jun 2026 22:26:06 Z

Overeenkomst : International Contract
Functiebeschrijving :
SPIE Global Services Energy is currently looking for an Instrumentation and Control Maintenance Planning Engineer to join its work force in Angola. Key Responsibilities: Review instrumentation and control maintenance plans, calibration programs, campaign scopes, corrective work orders, safety system tasks, and statutory or compliance-related inspections. Create and update instrumentation and control work orders in the CMMS/ERP system, including detailed task steps, calibration requirements, loop checks, function tests, isolation needs, manpower, duration, tools, test equipment, spares, acceptance criteria, and close-out documentation. Prepare work packs for field instruments, control valves, transmitters, analyzers, vibration monitoring systems, fire and gas systems, ESD systems, PLCs, DCS/ICSS interfaces, safeguarding systems, package controls, and associated instrumentation equipment. Identify spare parts, consumables, calibration gases, tubing, fittings, impulse lines, instrument cables, glands, test equipment, communication devices, repair kits, and special tools required for each scope. Support material master creation and BOM improvement for instrumentation and control items, including technical description quality, OEM references, hazardous area classification, calibration requirements, and equipment linkage. Follow up PRs, POs, vendor clarifications, service requirements, calibration certificates, test equipment validity, and documentation required for offshore mobilization. Coordinate warehouse verification, preservation checks, segregation, bagging, tagging, boxing, packing lists, and shipment readiness for instrumentation materials, test equipment, and tools. Interface with operations, ICSS/control specialists, maintenance supervisors, HSE, procurement, warehouse, logistics, vendors, OEMs, and offshore focal points to ensure integrated planning and safe execution. Support execution by reviewing daily progress, resolving technical queries, tracking findings, converting accepted recommendations into work orders, and improving future maintenance plans. Instrumentation and control work packs, CMMS/ERP updates, calibration and test equipment readiness trackers, spare parts lists, material registration inputs, PR/PO follow-up inputs, warehouse verification records, packing lists, execution support reports, and close-out action trackers.

Engineering degree or equivalent technical qualification in instrumentation, control, automation, or electrical and instrumentation engineering, with proven offshore oil and gas or FPSO experience. The candidate shall demonstrate knowledge of CMMS/ERP systems, calibration management, process instrumentation, control systems, safety systems, hazardous area equipment, vendor coordination, and offshore maintenance readiness.
Plaats van tewerkstelling : Luanda
Taal / Niveau :
Engels : C - Vloeiend

2026-43865 - Electrical Maintenance Planning Engineer M/F

Mon, 29 Jun 2026 22:26:03 Z

Overeenkomst : International Contract
Functiebeschrijving :
SPIE Global Services Energy is currently looking for an Electrical Maintenance Planning Engineer to join its work force in Angola. Key Responsibility: Review electrical maintenance plans, backlog, statutory inspections, campaign scopes, and corrective work orders to identify activities requiring detailed planning and advance readiness. Prepare and update electrical work orders in the CMMS/ERP system, including task steps, electrical isolations, lockout/tagout considerations, manpower, duration, tools, test equipment, consumables, spare parts, acceptance criteria, and close-out requirements. Develop work packs for generators, switchboards, MCCs, UPS systems, battery systems, transformers, motors, lighting, electrical distribution, heat tracing, Ex equipment, package electrical systems, and associated auxiliaries. Identify and validate electrical spare parts, consumables, fuses, breakers, cables, glands, terminals, relays, meters, batteries, test equipment, calibration requirements, and special tools. Support material master registration and BOM improvement for electrical equipment, ensuring clear technical descriptions, OEM references, ratings, hazardous area requirements, and equipment linkage. Follow up procurement, technical clarifications, PR/PO status, vendor documentation, inspection requirements, and certification needs for electrical materials and services. Coordinate warehouse verification, preservation checks, segregation, bagging, tagging, boxing, packing lists, and shipment readiness for electrical materials and tools. Interface with operations, electrical supervisors, HSE, procurement, warehouse, logistics, vendors, OEMs, and offshore focal points to ensure execution readiness and safe electrical work preparation. Support execution reporting, technical query resolution, findings review, punch-list closure, and creation of follow-up work orders arising from electrical inspections or maintenance activities. Electrical work packs, CMMS/ERP updates, electrical material and certification trackers, spare parts lists, PR/PO follow-up inputs, warehouse verification records, packing lists, execution support reports, and close-out actions from electrical findings.

Engineering degree or equivalent technical qualification in electrical engineering, with proven experience in offshore oil and gas or FPSO electrical maintenance planning. The candidate shall be familiar with CMMS/ERP systems, electrical safety, hazardous area equipment, maintenance planning, material identification, certification control, vendor coordination, and offshore execution requirements.
Plaats van tewerkstelling : Luanda
Taal / Niveau :
Engels : C - Vloeiend

2026-43849 - Mechanical Supervisor M/F

Mon, 29 Jun 2026 22:25:37 Z

Overeenkomst : Interim
Functiebeschrijving :
SPIE Global Services Energy is currently looking for a Mechanical Supervisor to join its work force in Angola. Key Responsibilities: HSE Ensures HSE policy fulfillment during his activities Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules Is responsible to ensures compliance with HSE (occupational and process) Legislation, Company Standards and Procedures under his area of responsibility to ensure employees safety, legislative compliance and responsible environment attitude Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity Contributes to achieve and improve HSE targets, respecting the existing procedures and advising new specific ones (if required); Performs the updating of technical documentation; Gives his contribution in Hazard Analyses, incident investigations, Root Cause Failure Analyses, process incidents advising his hierarchy about HSE issues and proposing corrective solutions; Ensures record keeping and reporting of action items from Process Hazard Analyses, Incident Investigations, Root Cause Failure Analyses, Process Incidents audits and other activities as required; Operates in conformity with mechanical codes, standards, regulations and industry best practices (ASME, API,ANSI, and OSHA); Checks and verifies that mandatory aspects (including those concerning local law scenario) are properly implemented for all activities carried out; Participate to safety talk before and after intervention Participates to key procedure audits in proactive manner; Respects the waste management policy in force on site, verifying that all activities performed under his own responsibility, comply it, without any exceptions; Operations Organizes on site the maintenance operations which are placed under his responsibility, Assists the planning team by giving any technical support for the preparation of the jobs in his discipline. With his teams assists specialists working under Specific Maintenance Contracts (SMC), Ensures that COMPANY’s HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility, Manages interventions using the CMMS and checks intervention reports in the CMMS (including those concerning SMC) and writes the technical reports related to his field, Monitors the functioning of utilities and equipment placed under his responsibility, Ensures that the transfer of knowledge by mentoring occurs properly within his teams, and actively participates in this himself, Carries out, at the CSR request, any intervention within his field of competence. Takes in charge the systems under his responsibility in case of breakdown until correct operation status.

Methods ✓ Identifies recurrent corrective maintenance interventions, analyses them and suggests improvements, ✓ Keeps a critical eye on current preventive maintenance programmes and, if need be, suggests improvements, ✓ Warns support teams of any recurring problems related to the availability or quality of spare parts, ✓ Suggests improvements and requests modifications. Quality Assurance ✓ Verifies the quality of his teams’ interventions by frequent on-site checks, ✓ Ensures that the members of his teams have the qualifications and skills required for the tasks entrusted to them and, if need be, suggests corrective measures. Purpose ✓ He is responsible for maintenance operations within his field of competence. ✓ He ensures that maintenance operations under his responsibility are carried out in strict accordance with COMPANY’s current safety rules and operating procedures and in accordance with standard industry practice, thereby guaranteeing the quality of maintenance operations, within his field, carried out on site by CONTRACTOR. ✓ He guarantees a good level of availability of the equipment he is responsible for on production sites. ✓ He plays a predominant role in the transfer of skills to personnel undergoing training by mentoring on site. Qualifications required: The holder of this position must have the following qualifications: ✓ Higher National Diploma or Certificate (HND/HNC (A-levels + 3 years’ study) or BTS/DUT or equivalent, ✓ 5 to 10 years’ experience in the maintenance field on oil and gas production installations, ✓ A basic knowledge of the process of oil and gas treatment, installations and a thorough knowledge of the equipment used in oil and gas treatment installations ✓ Specific professional knowledge: SAP/R3 experience and know-how ✓ Ability to lead and motivate multi-national teams, ✓ Pride in his work, ability to maintain good relations with colleagues and others, ✓ Physical ability to work on offshore installations in the climatic conditions of the site, ✓ Working language: English Bright 3.5 (or equivalent) He must have a proven sense of responsibility
Plaats van tewerkstelling : DALIA FPSO
Taal / Niveau :
Engels : C - Vloeiend
Taal / Niveau :
Frans : B - Goede beheersing

2026-43801 - Senior Instrument/Metering Technician M/F

Mon, 29 Jun 2026 22:24:46 Z

Overeenkomst : Onbepaalde duur
Functiebeschrijving :
Organizes and performs on site the maintenance operations which are placed under his responsibility, with his teams assists specialists working under Specific Maintenance Contracts (SMC), Ensures that COMPANY's HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility Ensures that all maintenance and repairs to plant and equipment are carried out in a safe and efficient manner and in strict compliance with company operating procedures and any relevant statutory legislation in order to maintain all such equipment in sound and safe operating condition. Manages intervention reporting using the CMIMS, Enters intervention reports in the CMIMS (including those concerning SMC) and writes the technical reports related to his field, Monitors the functioning of systems placed under his responsibility, Ensures that the transfer of knowledge by mentoring occurs properly within his teams, and actively participates in this himself, Manages the team of technicians directly under his responsibility, Carries out, at the CSR request, any intervention within his field of competence. Takes in charge the systems under his responsibility in case of breakdown until correct operation status is resumed. METHODS Identifies recurrent corrective maintenance interventions, analyses them and suggests improvements, Keeps a critical eye on current preventive maintenance programmes and, if need be, suggests improvements, Warns support teams of any recurring problems related to the availability or quality of spare parts, Suggests improvements and requests modifications. Ensures adequate risk assessments and pre-work meetings for all activities and that all technicians directly under his responsibility contribute and comply with the risk assessments and pre-work meetings. Ensures adequate PPE and procedures are provided or generated for the tasks to be actioned. Actions numerous site checks to ensure safe working practices. QUALITY ASSUARANCE Verifies the quality of his teams' interventions by frequent on-site checks, and reviews all completed worksites to ensure technical correctness and site cleanliness prior to hand-back of plant to Production team. Ensures that the members of his teams have the qualifications and skills required for the tasks entrusted to them and, if need be, suaaests corrective measures.

BEng or Equivalent with necessary experience. 8 years' experience maintaining oil and gas installations. Thorough knowledge of the equipment used in the treatment of oil and gas. Hands on knowledge of custody transfer systems. Proficiency in operating small provers. Direct hands on experience with OEM flow computers.
Plaats van tewerkstelling : Offshore from Port Harcourt
Taal / Niveau :
Engels : D - Zakelijk vloeiend

2026-43408 - Internal Communication Officer *(M/F) M/F

Mon, 29 Jun 2026 22:17:26 Z

Overeenkomst : Interim
Functiebeschrijving :
SPIE Services Nigeria Limited is currently looking for Internal Communication Officer to join its work force in Nigeria. See Job description below SERVICE OBJECTIVE A. Internal Communication Delivery Support the implementation of approved internal communication plans across the organization. Gather, validate, and synthesize information from departments, assets, and functions for internal dissemination. Ensure that all communication outputs align with corporate communication standards, branding guidelines, and local regulatory requirements. Support effective cascading of key messages and corporate priorities across all staff groups and locations. B. Content Creation and Editorial Support Write, edit, and publish high-quality content for internal digital and print platforms including intranet, Viva Engage, OneCom Nigeria, Focus Nigeria, TUPNEWS, Bridgers Magazine, and internal newsletters. Produce a minimum of one hundred (100) internal stories annually. Conduct interviews with managers, functional leads, and employees to support editorial content. Participate in editorial meetings and manage assigned content from initial briefing through drafting, review, approval, and publication. Contribute content to special publications such as Focus Nigeria, Partnership Magazine, and CSR or corporate reports. C. Event Coverage and Reporting Provide internal communication coverage of events including management visits, asset activities, safety campaigns, and community engagements. Produce post-event reports, feature articles, photo stories, and summaries for use across internal communication channels. Support coverage of selected external events where required. D. Leadership Communication Support Assist in the preparation and drafting of speeches, talking points, presentations, and internal messages for leadership as directed. Maintain accurate records, archives, and repositories of approved and validated communication materials. E. Digital and Multimedia Communication Support regular updates and content management on intranet and Viva Engage platforms. Develop basic visual and multimedia communication materials including infographics, photo stories, and campaign assets to support internal communication initiatives. F. Stakeholder Coordination Liaise with departments, assets, and functional teams to source information and confirm accuracy of content prior to publication. Act as a communication liaison to support information flow and collaboration across teams, locations, and hierarchies.

G. Crisis and Sensitive Communication Support Support internal communication during incidents and emergency situations. Apply approved crisis communication protocols with speed, accuracy, discretion, and sensitivity. Ensure strict adherence to instructions and approval processes in high-risk or regulated situations. H. Monitoring, Reporting, and Continuous Improvement Track readership, engagement, and feedback metrics across digital communication platforms.
Plaats van tewerkstelling : Port Harcourt, Nigeria
Taal / Niveau :
Engels : C - Vloeiend

2026-43315 - Planning & Reporting Engineer* M/F

Mon, 29 Jun 2026 22:16:47 Z

Overeenkomst : Interim
Functiebeschrijving :
SPIE Services Nigeria Limited is currently looking for Planning & Reporting Engineer to join its work force in Nigeria. Activities to perform: Build TEPNG Project Management System Propose appropriate work breakdown structure for each project that is appropriate and standardization and consolidation of reporting, streamlining reporting routines. Support the CMS (to be followed by PPM) by identifying all associated planning projects (trackers) & reporting (dashboards), estimation (benchmarks) generic documents, templates, forms standardizing method and improving quality and efficiency, in line with head quarter procedures and guidelines. Support the updating of annual PPM schedule, project L 0 & 1 related to the COMEX file, follow up on the SRA for these files and PR2 /3 and 4 review related to schedule and reporting follows up and simplifies processes between projects and other entities, clarifying responsibilities and involvements. Control the portfolio Manage the Work Time Schedule in relation to the Exhibit C for each package and integrate other services such as drilling and OPS.to consolidate the various project schedules & reports into various key schedule /milestone and manning levels for each activity for the PPM activities. Monitor implementation of the work breakdown structure, Schedule, progress measurement and reporting procedures, using appropriate tools. Developing and maintaining schedules at project level, with analysis of critical path and potential clashes and proposal of remedial actions/solutions. Ensuring availability at all times of an updated and accurate scheduling and progress measurement documentation. Ensuring reporting at Project level (issue of Weekly reports, Monthly Status Report...) Identify high level Risks (overruns, DLDs) and opportunities at portfolio level with mitigation actions. To lead (from planning and reporting point of view) in the preparation / consolidation and review of the various Project schedules and report updates (internal and external / Annual and Multiyear) with inputs from the members of the Project Team and provide “ad hoc” plans support as required. Provide support and resources to projects Propose support and Manage services on behalf of projects when required. Improve and learn from experience Gather and share lesson learned from projects Nigeria regarding project performance including project schedules benchmarks with Onetech. Share regular feedback with local contractors to better work together from one project to another.

QUALIFICATIONS / EXPERIENCE REQUIRED Minimum bachelor’s degree or equivalent in accounting and or similar background. Typically, 20 years of oil and gas industry professional experience of which at least 10 years in an equivalent position as a lead planning, reporting and risk engineer.
Plaats van tewerkstelling : Port Harcourt, Nigeria
Taal / Niveau :
Engels : C - Vloeiend

2026-43404 - Onshore Preparation Team Leader M/F

Sat, 20 Jun 2026 22:21:30 Z

Overeenkomst : International Contract
Functiebeschrijving :
SPIE Global Services Energy is currently looking for Onshore Preparation Team Leader to join its workforce here in Nigeria on ERHA project. Key Responsibilities: To be responsible for the coordination and preparation of all Preventive Maintenance activities in the Maintenance team. To be responsible for the coordination and preparation of all Campaign Maintenance activities in the Maintenance team (Mono-Campaigns, Maintenance Opportunity Works for major equipment intervention, Complex Maintenance operations, FFSD, etc.) To take charge of and ensure the accuracy of detailed technical elements of the preparation phase. To review related Work Orders lists to ensure that all outstanding works in the concerned package/system are fully taken into account during the preparation of each intervention. To follow-up with all concerned persons to ensure that all administrative components of the preparation are correctly and promptly carried out: Work Packs, Materials, Tools, Consumables, Manpower planning, etc. To issue Weekly Global Preparation Reports for all ongoing works highlighting the status of the major elements: WO list validation, Work Pack readiness, Scaffold requirements, Required Tools/Materials, Mobilization forecast, Adhoc team readiness, Global preparation readiness, Execution Status, Work Schedule, etc. To monitor procurement activities and ensure that critical items with long lead delivery impacting job preparations are identified in advance. To ensure proper hand-over of the activity on site before execution, to avoid Safety or unwanted Operational incidents. To organize for Complex Maintenance jobs, Job Risk Assessments, Kick Off Meetings (RLO’s), Pre-job meetings (ROC’s), etc. to ensure that all concerned persons understand the scope of the activities. To prepare specific presentations and closure reports during the period of major campaign preparations and execution in order to inform Management, highlighting lesson points and making recommendations in order to improve the Planning / Preparation process. To coordinate with his team to issue REX and feedbacks whenever necessary. To arrange specific campaigns frequently to address the Work Order backlog situation in SAP. To ensure technical closure of all Work Orders related to other Campaign activities after the completion of the intervention in order to ensure zero backlogs arising there-from. To participate to the update of all the Short Term, Medium Term and Long-Term Plans for the Maintenance Support entity. To liaise with Maintenance Superintendent and CSR on site to ensure that both Offshore and Onshore teams are always on the same page on the planning. To receive information from Offshore team on plant/equipment histories and maintain up-to-date records for all individual pieces of equipment.

He/She performs proper works coordination, activities reporting, equipment condition analysis, in view of maintaining and optimizing the operations and the equipment performance. He/She is responsible for preparation and reporting for Maintenance activities including issuance of dashboards and reports. He/She ensures the issuance and optimization of the Maintenance entity Plans and Practices in view of budget control, production optimization and HSE best Performance. He/She demonstrates personal commitment to the HSSE policy of the Company He/She controls and administers the technical and administrative documentation within the Maintenance entity including engineering and vendor technical documentation and ensures update of SAP and servers. He/She is responsible for ensuring that the equipment registers are kept updated and that maintenance records are validated at proper level, properly reported, recorded and maintained in the dedicated data bases. He/She ensures that the failures, breakdowns, losses of performance are promptly and efficiently monitored using the KPI’s and coordinate performance improvement. He/She ensures consistency of the methods used by the various maintenance disciplines. He/She is responsible for initiating, control, and validate the studies aiming at equipment optimization. He/She ensures that the specifications for repair, modifications and materials comply with the relevant regulations, Company rules, technical codes, standards and norms. He/She is the link to strengthen the coordination between Methods team, Site team and Scheduler team, ensuring full and strong involvement of the Scheduler in the daily maintenance subjects, especially with respect to Offshore Support (daily Notifications follow-up and assignment, WO’s preparation, Scheduling, Reporting, Closing when due, Backlog clearing, etc.).
Plaats van tewerkstelling : LAGOS / OFFSHORE
Taal / Niveau :
Engels : D - Zakelijk vloeiend

2026-43141 - Wellsite Subsea Engineers M/F

Fri, 12 Jun 2026 22:19:45 Z

Overeenkomst : Interim
Functiebeschrijving :
Key Activities: - Manage interfaces between subsea equipment suppliers, SPS department and drilling rig during well operations. - Coordinate and witness subsea equipment SIT, offshore testing and installation activities, when required (i.e. Landing String system, IWOCS, etc.). - Assisting Drilling superintendent on subsea BOP troubleshooting - Reviewing and commenting on technical documentation produced by the contractors (e.g. technical reports, specifications, procedures, drawings, etc.) ensuring the implementation of the established procedures and good engineering practice. - Review configuration of subsea Landing String equipment, such as the Subsea Test Tree (SSTT) space-out inside the BOP, lubricator valve positioning, retainer valves functionality, and surface flow tree. - Act as focal point for the rig contractor and completion, well intervention, and subsea equipment suppliers to finalize the rig layout, optimizing onboard equipment positioning and defining any required rig modifications (e.g., control umbilical routing, surface equipment placement, coiled tubing lifting frame installation, Landing String and XT IWOCS umbilical arrangement).- Follow up offshore operations on the drilling rig for landing string operations and well testing - Follow up offshore operations on the drillship for landing string operations and well testing - Solid knowledge of horizontal X-tree system and subsea completion operations, including tubing hanger installation and crown plug installation/retrieval. - Solid knowledge of IWOCS (Intervention Workover Control System), including but not limited of system set up - Solid knowledge of subsea electro-hydraulic (EH) landing string systems and related completion operations. - Solid knowledge of subsea slickline operations Resolving ongoing technical issues concerning all aspects of subsea equipment. - Proven ability to identify and resolve technical and operational issues related to subsea equipment throughout all project phases. HSE Requirements Comply with requirements of Safety, Health and Environmental laws of the Country. Obey the Company Policy on Safety, Health and Environment and aim at achieving the Company's HSE strategic objectives. Practice Company's HSE Management System. Provide safe and healthy conditions of work to subordinate personnel and control over compliance by the personnel with safe, labor protection rules and regulations. Assure the application of all the relevant HSE procedures and standards in organization and development activities. Ensure, supported by the HSE structure, training and staff development on HSE aspects. Ensure that all contractors are competent and fully knowledgeable of Project HSEQ procedures. Prepare the field development strategy, including preliminary contracting strategy and Project HSE Plan. Supervise the preparation of the risk register and the relevant mitigation strategy to address identified uncertainties and managing the risks. Sup

Subsea Engineer with Baker Hughes IWOCS and Horizontal Xmas Tree experience Purpose: Subsea Completion Engineer will be responsible at wellsite for managing interfaces between subsea equipment and drilling rig, ensuring readiness of documentation and equipment, and supporting testing, installation, and commissioning activities during well operations for an ultra-deep water project. In addition, to support the Drilling and Completion & Development team in the engineering, design, manufacturing, testing and installation of subsea production systems focusing on landing string operations, IWOCS system setup, well testing, slickline and subsea completion operations. To assure that the design meets project requirements, applicable standards and engineering best practices. Main Responsibilities: - Responsible for the planning and execution of the subsea landing string /well testing & clean up/ slickline, IWOCS integration and main interface with SPS Department for the Drilling and completion activity for a ultra deepwater project
Plaats van tewerkstelling : Accra, Takoradi and Offshore Ghana
Taal / Niveau :
Engels : D - Zakelijk vloeiend

2026-42902 - Contrôleur de gestion H/F

Thu, 11 Jun 2026 22:15:54 Z

Overeenkomst : Bepaalde duur
Functiebeschrijving :
Concevoir et piloter des indicateurs de performance (KPI).  Suivre l’évolution des résultats financiers de l’entreprise et évaluer sa performance.  Proposer et mettre en œuvre des mesures correctives si necessaire.  Réaliser le suivi budgétaire et assure les clôtures comptables.  Mettre en place et contrôler les procédures internes.  Proposer des solutions d’optimisation de la rentabilité.  Conseiller l’entreprise en matière de gestion comptable et financière.  Élaborer le reporting vers la maison mère (carnet de commandes, compte de résultat, prévisions glissantes, crédit client, provisions).  Rapporter ses analyses à la Direction de la Filiale et au Siège, en expliquant les écarts constatés.  Participer à l’élaboration et à l’analyse des budgets et re-prévisions annuelles.  Contribuer aux revues d’affaires et aux appels d’offres ponctuels.  Participer à l’amélioration de l’ERP en lien avec la Direction Financière.  Assurer le lien avec les opérationnels pour leur fournir les informations financières nécessaires.  Remettre en place et suivre les procédures de contrôle de gestion local.  Assiste la Direction Financière lors des audits CAC et/ou interne, contrôle des administrations, ...

Formation supérieure en finance, comptabilité, contrôle de gestion ou école de commerce (Bac+3 à Bac+5). Expérience de 2 ans minimum en contrôle de gestion (stages inclus). Connaissance du secteur d’activité de l’entreprise (atout). Anglais professionnel souhaité. Comptabilité générale et analytique. Maîtrise des outils de contrôle de gestion et ERP (ex. IFS). Reporting et analyse financière. Sens de la rigueur et de l’organisation. Esprit de synthèse et d’analyse. Résistance au travail sous pression. Esprit d’initiative et proactivité.
Plaats van tewerkstelling : Base DPS, Rue Andrée GALLAIS, B.P. 579, Port-Gentil, Gabon
Taal / Niveau :
Frans : E - Moedertaal
Taal / Niveau :
Engels : E - Moedertaal

2026-43262 - CHEFE DE EQUIPA DE MECANICO* M/F

Mon, 25 May 2026 14:05:02 Z

Overeenkomst : Bepaalde duur
Functiebeschrijving :
Operations: Organises and performs on site the maintenance operations which are placed under his responsibility, Ensures strict compliance with COMPANY HSE policies, including adherence to Permit to Work (PTW) procedures, isolation standards, and approved operating procedures. Leads and coordinates field technicians during maintenance and troubleshooting activities, ensuring work is executed safely, efficiently, and in accordance with industry best practices. Enters intervention reports in the CMMS (including those concerning SMC) and writes the technical reports related to his field, Prepares detailed technical reports, including failure analysis, root cause identification, and corrective/preventive recommendations. Carries out, at the Supervisor request, any intervention within his field of competence. Performs advanced fault diagnosis and takes in charge the systems under his responsibility in case of breakdown, ensuring timely restoration to normal operating conditions.

Technical Diploma or HND in Mechanical Engineering, Industrial Maintenance, or related discipline. Minimum 8 years’ experience in Oil & Gas mechanical maintenance, including offshore operations. Minimum 3 years in a supervisory or Foreman position. Strong experience with rotating and static equipment including pumps, compressors, gearboxes, turbines, diesel engines, valves, heat exchangers, air coolers, hydraulic systems, and cranes. Good understanding of preventive, corrective, and condition-based maintenance. Ability to read and interpret P&IDs, PFDs, isometric drawings, vendor manuals, and datasheets. Practical knowledge of alignment, flange management, bolting, lubrication, bearing replacement, and mechanical troubleshooting. Familiarity with CMMS systems, preferably SAP PM. Good knowledge of PTW, isolations, gas testing, ATEX requirements, PPE, and offshore HSE procedures. Good supervisory, reporting, and communication skills. Proficient in Microsoft Word and Excel. Ability to work offshore rotational schedules in a multicultural environment.
Plaats van tewerkstelling : Offshore Block 3/05
Taal / Niveau :
Portugees : C - Vloeiend
Taal / Niveau :
Frans : C - Vloeiend
Taal / Niveau :
Engels : C - Vloeiend

2026-43345 - INSTRUMENTATION FOREMAN ** M/F

Mon, 18 May 2026 14:58:20 Z

Overeenkomst : Onbepaalde duur
Functiebeschrijving :
HSE ✓ Ensures HSE policy fulfillment during his activities ✓ Have a good understanding of COMPANY HSE rules. ✓ Assists the Supervisors on field to spread the HSE policies and to put the rules in place. ✓ Ensures that the team under his responsibility (if any) has well understood group policies and apply them ✓ Assist supervisor to write on a daily basic risks analysis for specific intervention. ✓ Participate to safety talk before and after intervention ✓ Ensures that employees under his responsibility (if any) have the required habilitation. ✓ Participates to key procedure audits in proactive manner; ✓ Respects the waste management policy in force on site, verifying that all activities performed under his own responsibility, comply it, without any exceptions; Operations ✓ Organises and performs on site the maintenance operations which are placed under his responsibility, ✓ With his teams assists specialists working under Specific Maintenance Contracts (SMC), ✓ Ensures that COMPANY’s HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility, ✓ Ensures that all maintenance and repairs to plant and equipment are carried out in a safe and efficient manner and in strict compliance with COMPANY operating procedures and any relevant statutory legislation in order to maintain all such equipment in sound and safe operating condition. ✓ Manages interventions using the CMMS, ✓ Enters intervention reports in the CMMS (including those concerning SMC) and writes the technical reports related to his field, ✓ Monitors the functioning of systems placed under his responsibility, ✓ Ensures that the transfer of knowledge by mentoring occurs properly within his teams, and actively participates in this himself, ✓ Carries out, at the Supervisor request, any intervention within his field of competence. ✓ Takes in charge the systems under his responsibility in case of breakdown until correct operation status. Methods ✓ Identifies recurrent corrective maintenance interventions, analyses them and suggests improvements, ✓ Keeps a critical eye on current preventive maintenance programmes and, if need be, suggests improvements, ✓ Warns support teams of any recurring problems related to the availability or quality of spare parts and Suggests improvements and requests modifications. Quality Assurance ✓ Verifies the quality of his teams’ interventions by frequent on-site checks, ✓ Ensures that the members of his teams have the qualifications and skills required for the tasks entrusted to them and, if need be, suggests corrective measures.

Purpose ✓ He is responsible for maintenance operations within his field of competence. ✓ He ensures that maintenance operations under his responsibility are carried out in strict accordance with COMPANY’s current safety rules and operating procedures and in accordance with standard industry practice, thereby guaranteeing the quality of maintenance operations, within his field, carried out on site by CONTRACTOR. ✓ He guarantees a good level of availability of the equipment he is responsible for on production sites. ✓ He plays a predominant role in the transfer of skills to personnel undergoing training by mentoring on site. Qualifications required: The holder of this position must have the following qualifications: ✓ Higher National Diploma or Certificate (HND/HNC (A-levels + 3 years’ study) or BTS/DUT or equivalent, ✓ 3 to 5 years’ experience in the maintenance field on oil and gas production installations, ✓ A basic knowledge of the process of oil and gas treatment, installations and a thorough knowledge of the equipment used in oil and gas treatment installations ✓ SAP/R3 experience and know-how ✓ Ability to lead and motivate multi-national teams, ✓ Pride in his work, ability to maintain good relations with colleagues and others, ✓ Physical ability to work on offshore installations in the climatic conditions of the site, ✓ Working language: English Bright 3.5 (or equivalent)
Plaats van tewerkstelling : GIRASSOL FPSO
Taal / Niveau :
Engels : C - Vloeiend
Taal / Niveau :
Portugees : C - Vloeiend
Taal / Niveau :
Frans : B - Goede beheersing

2026-43114 - PREPARADOR MECÂNICO* M/F

Mon, 27 Apr 2026 07:47:40 Z

Overeenkomst : Bepaalde duur
Functiebeschrijving :
General Description Support of offshore operations, Facilitate maintenance activities of the SITE team through adequate preparation (spare parts verification etc…) Check repairs requirement and quality Short and medium term improvement methods HSE: Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity Operations: Review preventive maintenance program validity. Check availability of means to complete it as and when required. Assist the SITE as required for corrective maintenance Prepare work pack for specific maintenance job when requested Analyze CMMS report for his field of competence and recommend improvement solutions to COMPANY as required Ensures quality of the maintenance operations: preparation of intervention files, work orders, reporting, CMMS

Theoretical Knowledge Basic understanding of oil & gas facilities and processes (well to export), including hydrocarbon risks (explosion, asphyxiation). Working knowledge of SAP for maintenance planning, work order preparation, material requisition, and history tracking. Proficient in basic computer use (Word, Excel, email, internet). Strong foundation in mechanical principles and process parameters (pressure, temperature, flow, density) and their impact on rotating and static equipment performance. Able to read and interpret P&IDs, isometric drawings, GA drawings, equipment datasheets, and vendor documentation. Equipment Knowledge Working knowledge of mechanical installation (filters, gear boxes, exchangers, air coolers, diesel engine, gas turbines, centrifugal and reciprocating pumps or compressors, common valve types (butterfly, gate, ball, cage and PSV) and hydraulic systems (cranes, HPU, pumps). Maintenance work preparation know-how Understand maintenance strategies and techniques, including: Preventive and corrective maintenance Alignment, tolerances, and clearances Basic condition monitoring concepts (vibration, temperature, leaks) Be able on a given preventive work order to prepare tools, spare parts and adapt procedure or work instruction. Basic understanding of process control interactions with mechanical systems, including how equipment responds to operational changes (start-up, shutdown, trips). Awareness of safety systems and interfaces with mechanical equipment, including ESD actions, relief systems, and isolation philosophy. Qualifications: Bacharelato em Engenharia Mecânica Has held as a minimum a Mechanical foreman position for up to 5 years in an offshore maintenance setting Computer literacy is required, Ability to work offshore under the climatic conditions of the site, Ability to work in a multinational team. Ability to work in a service relationship. Experience in CMMS
Plaats van tewerkstelling : Offshore Block 3/05
Taal / Niveau :
Portugees : C - Vloeiend
Taal / Niveau :
Frans : C - Vloeiend
Taal / Niveau :
Engels : C - Vloeiend

2026-42814 - Tecnico de Grua* M/F

Tue, 21 Apr 2026 10:39:02 Z

Overeenkomst : Bepaalde duur
Functiebeschrijving :
HSE Complies with and applies the COMPANY’s HSE regulations particularly Permit to Work procedures, approved operating procedures, and standard industry practice during maintenance activities under supervision. Reports unsafe acts, conditions, and near misses to the supervisor. Petroleum: Have a basic understanding of offshore facilities and process systems. Demonstrates awareness of hydrocarbon behavior and associated risks (explosion, asphyxia…). Computer Skills: Able to produce basic report using Microsoft Word Able to perform simple calculations and data entry using Microsoft Excel. Able to use email and internet tools for work purposes. Physics: Understands and applies basic physical laws and units (forces, mass, energy, Newton’s laws). Has basic knowledge of materials and steels, including usage, mechanical resistance, corrosion mechanisms, and prevention methods. Engineering: Able to read and use basic engineering drawings (P&IDs, PFDs, isometrics). Able to interpret vendor documentation, nameplates, datasheets, tolerances, and adjustment figures. Able to produce clear and accurate hand sketches and drawings to scale. Equipment: Understands the working principles of crane‑related mechanical and hydraulic equipment, including:Filters Gear boxes Diesel engines Common valve types (butterfly, gate, ball, PSV) Crane hydraulic systems (crane hydraulic circuits, HPU, hydraulic pumps). Fully familiar with lubrication requirements and different types of lubricants. Familiarized with preventive maintenance tasks and their objectives. Aware of Condition‑Based Maintenance (CBM) techniques such as vibration monitoring and oil analysis, including their purpose and limitations. Maintenance: Understands preventive and corrective maintenance concepts and basic maintenance planning principles. Has basic knowledge of CMMS usage (issue notifications, read and complete work orders). Able to identify and correctly use mechanical measuring tools. Able to identify spare parts and follow appropriate procedures or work instructions.

Angolan national. Technical secondary education or vocational training in Mechanical Maintenance or related discipline. 0 to 3 years of experience in mechanical maintenance or industrial equipment maintenance; oil & gas experience is an advantage. Basic knowledge of diesel engines, hydraulic systems, gearboxes, and lubrication principles. Ability to use basic mechanical tools and follow maintenance procedures under supervision. Strong ability to read drawings and technical documentation. Strong awareness of HSE rules and willingness to comply with offshore safety requirements. Fluent in Portuguese; basic English knowledge required. Basic computer skills (Word, Excel, email). Medically fit and willing to work offshore under rotational schedules. Demonstrates motivation, discipline, and willingness to learn.
Plaats van tewerkstelling : Offshore Block 3/05
Taal / Niveau :
Engels : C - Vloeiend
Taal / Niveau :
Frans : C - Vloeiend
Taal / Niveau :
Portugees : C - Vloeiend